RC Factory Veloxity Green 3D Aerobat EPP (1070mm)

This is the new rc factory Veloxity it is Loosely based on the full-scale Velox Revolution 1, the Veloxity delivers an experience never before available in a foam plane. As one of the stiffest foam airframes around, precision tracking, a fast roll rate, wild tumbles, knife edge spins, and other maneuvers normally reserved for wood airplanes are all within the Veloxity’s repertoire. With its consistent roll rate and arrow-straight tracking, the Veloxity may be the best rifle roll trainer out there! Of course, pull back on the throttle and the Veloxity will 3D with the best of them. A custom airfoil and carefully chosen moment means that smooth harriers upright, inverted, and rolling are stable and predictable, but not sloppy or imprecise…the Veloxity maintains precision through its whole flight envelope. Building the Veloxity is a snap. RCFactory’s precision foam machining and laser cut wood, carbon, and fiberglass parts bond in quickly and easily into pre-cut slots and grooves. In many ways the Veloxity builds as easily as a 32″ flat plane, and a couple of easy sessions is all you’ll need to get it together and ready to rip. Controls are actuated with precision ball links that go together easily and pop off in a hard crash, saving servos. Aspiring pilots need not fear the Veloxity With reduced throws and the throttle pulled back a bit, it’s an easy airplane to fly and is extremely predictable. It’s a perfect step between 32″ flat foamies and your first balsa bird. The super strong airframe means that less than perfect landings and the occasional dirt nap will not keep you grounded!

Features
* All EPP foam construction results in a robust, resilient airframe
* 98% completed ARTF
* Generous wingspan improves orientation and stability
* Special CAD painting process – no decals to apply
* Carbon reinforced wings and fuselage
* Extra large control surfaces
* Incredible control authority – can be flown extremely slowly
* Smooth pattern performance
* Ideal 3D trainer
* Repairs easily with standard CA
* Quick build – typically 1-2 evenings

Specification
* Wing span: 1070 mm
* Length: 1120 mm
* AUW: up 550 g

Required to Complete
* Motor: 100 – 130g, 1000 KV
* ESC: 35 – 45A
* servo: 4 x 12g
* Battery: 3s lipo pack 1350 – 2200 mAh
* Propeller: 11 x 4.7 / 12 x 6

 

{NEW-RC-FACTORY}