RC Factory Puddle Star EPP Waterplane (1000mm)

This is the Puddle Star from RC Factory it is an extremely aerobatic twin motor EPP waterplane.The model features oversize control surfaces and with our powerset has an insane power to weight ratio which makes the plane an extemely agile 3D and aerobatic performer.If this is your first waterplane dial down the throws and it provides linear and predictable handling. Water starts and landings are easy and smooth with only throttle control.

Features:
* All EPP foam construction results in a robust, resilient airframe
* Generous 1000mm wingspan improves orientation and stability
* Special CAD painting process – no decals to apply
* Reinforced wings and fuselage
* Extra large control surfaces
* Incredible control authority – can be flown extremely slowly
* Smooth performance
* Ideal 3D trainer
* Repairs easily with standard CA
* Quick build – typically 1-2 evenings

Specification:
* Wingspan:1000mm/39.37in
* Length:1000mm/39.37in
* AUW:380g – 400g

Kit Contents:
* Pre-printed EPP Puddle Star airframe parts, hardware accessory pack, carbon fibre rod/batten,motor mount

Required to Complete:
* Radio System: TX/RX min 4-channel
* 2 x EMax MT1806 2280kv motors
* 4 x EMax ESO8MA Servos
* 2 x 12amp ESC
* 2 x APC-E 6 x 4 propellers
* Flight Battery:850mah-1000mah 3S 11.1v
* Standard CA glue