Emax KT Fascinate Depron/Carbon F3P/3D (825mm)

This innovative design from EMax provides exceptional, slow flight characteristics which should enable you to learn and fly an F3P (indoor aerobatic) schedule and 3D stunts with ease. Primarily an indoor model, the KT Fascinate may be flown outdoors on very calm mornings or evenings when the air is still. The full-colour printed Depron airframe is reinforced with carbon fibre to provide the solid, precise feel of balsa but without the weight.

Features:
* Laser-cut 3mm Depron parts for optimum strength and minimum weight
* Lightweight carbon fibre truss system virtually eliminates flex
* Minimal assembly is required using Depron-safe glue (we used UHU-Por and BSI Super Gold Foam Safe cyano)
* Vibrant screen printed scheme to aid orientation during wild manoeuvres
* Hardware accessory pack consisting of ply motor mount and control rod guides, light weight control horns and carbon rod bracing/control rods

Specification:
* Wingspan: 825mm/32.48in
* Length: 865mm/34.05in
* Weight: 160-185g/5.6-6.5oz

Kit contents:
* Laser-cut Depron airframe parts
* Hardware accessory pack
* Carbon fibre rod

Required:
* Motor – 50W – 80W (required)
* ESC – 6-10A brushless (required)
* Servos – 3 required, Ail -9g, Ele and Rud – 5g
* Battery – 330-450mAh 2S (7.4V) LiPo
* Radio System: TX/RX min 4-channel
* Prop GWS Slow Fly 8 x 4.3 or 9 x 4.7 (dependent on motor choice)
* Foam safe glue

This is an exceptionally slow and stable model with superb handling characteristics due to its extremely low flying weight.

What’s in the box:
* Depron foam airframe: fuselage, wings, tail surfaces
* Small parts pack
* Illustrated assembly instructions