Century Max Thrust ‘The Apprentice’ RTF Trainer

The Apprentice is the latest model to come from the Max Thrust hangar. It is supplied virtually Ready to Fly with everything in the box including a 2.4GHz FHSS radio system, LiPo flight battery and DC charger.

From the outset, this model was designed as an ideal training aircraft for the beginner who wants a complete and ready to fly model that they can have success with before moving on to bigger and more complex aircraft.

A specially designed propellor mounting system allows the prop mount to flex in the event of a less-than-perfect landing. This helps protect the prop against breakages and means you can enjoy flying the model again and again. Like all of the Max Thrust range, The Apprentice is moulded from EPOFLEXY which makes it very light weight but incredibly tough and capable of shrugging off most of those “whoops” moments.

Features:
* Ideal first model
* Designed for predictable, stable flight
* Tough EPOFLEXY construction
* One-piece, bolt-on wing
* Sprung wire tricycle undercarriage
* Minimal assembly (only needs tailplane to be glued in place and elevator linkage connected)

Specification:
* Wingspan: 810mm/31.9in
* Length: 640mm/25.2in
* Flying weight: 300g/10.6oz
* Motor: brushless BL2222, 2200KV (installed)
* ESC: brushless 15A (installed)
* Prop: 6 X 6
* Servos: 3 x 8g (installed)
* Battery: 800mAh 2S (7.4V) 30C LiPo (JST-BEC power connector, JST-XH balance plug)
* RC functions: ailerons, elevator, rudder, throttle

Contents:
* Airframe with pre-installed motor, ESC, servos and receiver
* Small parts pack
* 4-channel 2.4GHz FHSS transmitter
* 800mAh 2S (7.4V) 30C LiPo
* DC 2-3S 1A LiPo balance charger (requires (9-16V input power source)
* Illustrated instructions

Required to complete:
* a tiny bit of glue and a few minutes assembly time

Easily assembled with either UHU-por or epoxy, this is a quick build model ideal as a starter kit.